Home 
About WireBasics
Shop Online
   FAQ  
View Manual
  Contact    


The WireBasics CT-16 Cable Tester / Continuity Tester

Complete Starter Kit only $395!
Includes everything shown in the picture
We accept all major credit cards.
For easy hook up on harness test boards choose one of our extended ribbon cables or additional 16 pin adaptors from the drop down menu on the right then click "add to cart".


The wirebasics CT-16 not only tests wire harness assemblies, it is also perfect for testing cables.
The green adapters you see in the photo above are connected to the tester via the gray ribbon cables shown. Once connected the adaptors allow you to insert idividual wires into the green spring loaded contacts. This feature makes it easy for you to connect almost any wire harness or cable device. All you need to test your harness or cable is a mating connector to your ends with stripped wires. We also carry special pre-made adaptors for many standard plugs.

Available pre-made Adaptors:
CAT-5E/NETLAN, DB-9, DB-15, RCA, LPT1, IDE, COM PORT BOTH 9 AND 25 PIN.
We also have items not yet listed on this page.
We also make custom assemblies.
Please call for more information. (765)640-0348

Available options:NOW ALL STANDARD!
Internal SPDT Relay with three pin External Plug (C,NO,NC) $35  NOW FREE!
TTL Level Output for triggering Printer or Other Digital Device $29  NOW FREE!
Built in 9V Battery Compartment for portable use $10  NOW FREE!
If you have a harness test board and you want to make hook up a snap,   
then choose one of our extended ribbon cables (per foot). RC-16-CUSTOM  


WireBasics is a Product of...

Anderson Custom Electronics Inc.
copyright ACE Inc. 2005 all rights reserved

   Home    About WireBasics Shop Online    FAQ    View Manual   Contact     
WireBasics